skip to navigation
Typical markings for a liquefied gas cylinder according to TPED
- 25E = Thread Specification - Important to ensure the correct valve is used with your cylinder.
- GB = Country of Manufacture
- LUXFER = Cylinder Manufacturer
- L2816Z ....= Cylinder Type Number and Serial Number - This number is recorded by Luxfer which means, if ever necessary, the entire manufacturing history of your cylinder can be traced.
- AA6061 T6 = Alloy of Construction
- 11,5MM = Design Minimum Wall Thickness.
- 14,8KG = Empty Weight of Cylinder Only (kg)
- 13,4L = Minimum Water Capacity (litres)
- PH 250 BAR = (Test Pressure) - Shows the pressure that the cylinder should be tested to - this must not be exceeded.
- TARE 16,1 KG = Weight of cylinder plus valve plus any accessories fitted at time of filling such as collar and cage.
- 10 KG CO2 = Charge Weight.
- p 0038 = The mark of Conformity and Notified Body reference number to the Transportable Pressure Equipment Directive 1999/36/EC.
- e2UK902 GB = Pattern Approval number according to Directive 84/526. Replaced by EN1975 when this specification is design basis.
- [STAMP] = Stamp of Notified Body.
- 2002/09 = Year and Month of initial test.